MBU-12/P Oxygen Mask - With CX-4707 Cord

The MBU-12/P oxygen mask is standard equipment with US and NATO Air Forces . The shape of the mask provides excellent downward vision. The low profile design brings the mask close to the face and provides excellent stability during high G maneuvers. Anti-roll webs at the nose seal prevent downward roll off. The inherent rigidity of the integrally bonded soft rubber faceseat to a polysulfone plastic hardshell allows adjustment to provide superior sealing during pressure breathing.

The MBU-12/P is used with pressure demand oxygen systems not constant flow oxygen systems found in general aviation cabin aircraft. The advanced design of the combination-breathing valve provides greatly reduced exhalation resistance during pressure breathing, and a rolling diaphragm reduces the potential for valve sticking caused by residue accumulation. This unique combination valve meets or exceeds all performance requirements of MIL-V-27296. The MBU-12/P oxygen mask meets or exceeds the requirements of the U.S. Military Specification MIL-M-87163.

Four mask sizes are available to assure proper fit and comfort. 3-PIN or Quick Disconnect: Two oxygen mask connectors are available; Three-pin twist lock or Quick Disconnect. Three-pin twist lock if  a CRU-60 adapter is used with an emergency oxygen bottle. A quick disconnect fitting if you are connecting directly with the aircraft. CX. The CX-4707 cord is a communications cord that spirals down the mask and carries both the microphone and earphone circuits.

MBU-12/P Oxygen Mask -PA-101 Amp with 14" Mic Cord

   MBU-12/P Oxygen Mask -PA-101 Amp with 14" Mic Cord

The MBU-12/P Oxygen Mask is currently being used by the U.S. Military. The shape of the mask provides excellent downward vision. The low profile design brings the mask close to the face and provides excellent stability during high G maneuvers. Anti-roll webs at the nose seal prevent downward roll off. The inherent rigidity of the integrally bonded soft rubber faceseat to a polysulfone plastic hardshell allows adjustment to provide superior sealing during pressure breathing.

The MBU-12/P is used with pressure demand oxygen systems not constant flow oxygen systems found in general aviation cabin aircraft. The advanced design of the combination-breathing valve provides greatly reduced exhalation resistance during pressure breathing, and a rolling diaphragm reduces the potential for valve sticking caused by residue accumulation.

This unique combination valve meets or exceeds all performance requirements of MIL-V-27296. The MBU-12/P oxygen mask meets or exceeds the requirements of the U.S. Military Specification MIL-M-87163. Choosing a mask: SIZES: Four mask sizes are available to assure proper fit and comfort. PA-101 Amplifier with 14 Inch Microphone Cord: Select this configuration if your helmet has a cord that plugs into your aircraft. To use the mask microphone unplug your boom microphone from your helmet cord and plug in the oxygen mask microphone cord. 3-PIN or Quick Disconnect: Two oxygen mask connectors are available; Three-pin twist lock or Quick Disconnect. Choose Three-pin twist lock if you are going to use a CRU-60 adapter with an emergency oxygen bottle. Choose a Quick Disconnect fitting if you are connecting directly with the aircraft.

                      MBU-12/P Oxygen Mask

Originally developed by Gentex and Scott Aviation for US Armed Forces requirements this mask is now distributed by Aeromiltec Ltd.

Used with pressure demand systems, the Gentex MBU-12/P boasts a low profile design providing excellent stability during high-G maneuvers and anti-roll webs to prevent downward roll .The mask is compatible with HGU-55/P , HGU-55G , HGU-56/P and HGU-26/P Helmets.

Designed to replace the Gentex MBU-5/P, this unit offers superior comfort and efficiency including downward vision. The advanced design of the combination-breathing valve provides greatly reduced exhalation resistance during pressure breathing, and a rolling diaphragm reduces the potential for valve sticking caused by residue accumulation. This unique combination valve meets or exceeds all performance requirements of MIL-V-27296.

                      MBU-12/P Oxygen Mask

Used with pressure demand systems, the Gentex MBU-12/P boasts a low profile design providing excellent stability during high-G maneuvers and anti-roll webs to prevent downward roll.

Designed to replace the Gentex MBU-5/P, this unit offers superior comfort and efficiency including downward vision. The advanced design of the combination-breathing valve provides greatly reduced exhalation resistance during pressure breathing, and a rolling diaphragm reduces the potential for valve sticking caused by residue accumulation. This unique combination valve meets or exceeds all performance requirements of MIL-V-27296.

The MBU-12/P is configurable with M-101 Microphone and M-169 Microphone with Amp from Gentex or other mask mounted amplifiers and features a silicone rubber faceseal integrally bonded to a high strength gray polysulfone plastic hardshell. The unit meets or exceeds the requirements of the U.S. Air Force Specification MIL-M-87163 and is typically donned with a Gentex HGU-55/P and HGU-55CE helmets and laser visor with complimentary mask trim.   Four mask sizes are available.