Email :  aeromiltec@gmail.com 
HELMETS  HELICOPTER
SPH-4B D/V NVG  QRP   NATO Commset 
SPH-4B &  SPH-5C   NVG Platform  USN Commset

SPH-4B HELICOPTER HELMET



Originally designed by Gentex Inc. the Aeromiltec SPH-4B is the most commonly used helmet in the international marketplace. Aeromiltec standard configuration is in O.D.color with NATO commset, 24 inch coiled or straight cord set, in sizes Regular or XL. NVG quick release clip is optional at extra charge. The helmet shell is a high-strength, lightweight composite reinforced with epoxy resin. Rubber edge beading covers the peripherals of the shell.

 

Inner Liner

 

The energy-absorbing liner we deliver with is either the Zeta comfort liner or the rigid polystyrene molded to conform to the inside of the helmet shell.  Each lightweight ear cup assembly consists of a contoured plastic ear cup and a cushioned ear seal (with a raised inner ring for maximum sound attenuation and comfort).

 

Communications

 

The communications system consists of a boom-mounted microphoneM-87/AIC or Electret Mic , dual earphones, and a communications cord. A flex boom is available as an upgrade.process.  The visors assembly is available in a dual or single visor configuration. The dual visor option is available in 3 forms; plain (non-NVG compatible), or NVG platform (provides a permanent mount platform), and quick-disconnect version.Aeromiltec can deliver the helmet with ANR system.

 

Chinstrap/Retention Assembly Strength

 

The chinstrap/retention assembly withstands a strength test of 300 pounds when tested in using ANSI Z90.1lb test methodology and equipment. Available in double D-ring or as a quick-disconnect (snap).

 

Customization

 

Each helmet can be designed and/or configured with a variety of different features such as earphones, wire or flex boom microphones, communications cords/plugs, communication earplugs, and ANR (Active Noise Reduction). Other upgrade accessories such as CEP, NVG , ANR Headsets and Liplite are available upon request.

HGU-55/P w/NVG Special Ops 
HGU-57/P with CEP w/ NVG platform

                                            HGU-57/P NVG Helmet


Aeromiltec is currently supplying a wide variety of rotary wing helmets such as 

HGU-57/P, SPH-4B, SPH-5 ,and HGU-56/P as well accessories for those helmets such as communication system ,comfort liners energy absorbing liners ,chin and nape strap assy. visors and visor housing as well shells though  only to those who purchased from us the main systems and helmets only. 


Further we supply ANVIS-6 and ANVIS-9 NVG platforms and systems and 

various other accessories .


The HGU-57/P comes standard with our new vented, breathable high strength 400 Lbs retention with six-point attachment. The patented neoprene jacketed 6ft coiled main cable is far superior and outlasts low tech braided cables. This helmet eliminates the need for cross straps. This helmet is standard delivered with CEP or Bluetooth comm.


Choose from several colors at no additional charge. High or Low Impedance available: select your options when building your helmet. The HGU-57/Phelmet is US manufactured and may also be built to custom orders. Also new accessory is the nape Comfort Edge Roll- preventing forward roll while wearing NVG's. 


Sold complete with all standard military or general Aviation communications with or without ANR .

HGU-56/P  & ANVIS Platform
SPH-4B Dual Visor NVG Helicopter Helmet 



US Military Type Helicopter Helmets NVG ccompatible


Aeromiltec is currently supplying a wie variety of rotary wing helmets such asSPH-4 , SPH-5 , SPH-4B and HGU-56/P as well  accessories for those helmets such as communication system ,comfort liners eneregy absorbing liners ,chin and nape strap assy. visors and visor housing as well shells though only  to those who purchased from us the main systems and helmets only.  Further we supply ANVIS-6and ANVIS-9NVG platforms and systems and various otheraccessories .



The energy-absorbing liner we deliver with is either the Zeta comfort liner or the rigid polystyrene molded to conform to the inside of the helmet shell.  Each lightweight earcup assembly consists of a contoured plastic earcup and a cushioned earseal (with a raised inner ring for maximum sound attenuation and comfort).


Communications


The communications system consists of a boom-mounted microphone M-87/AIC or Electret Mic , dual earphones 150 or 600 Ohm, and a communications cord. A flex boom is available as an upgrade.process.  The visors assembly is available in a dual or single visor configuration. The dual visor option is available in 3 forms; plain (non-NVG compatible) or NVG platform (provides a permanent mount platform), and quick-disconnect version.Aeromiltec can deliver the helmet with ANR system. The Comm cord is NATO type which can be supplied straight or coiled 12 or 24 inch ending with U-174/U plug.  General Aviation cords and commset optional .


Chinstrap/Retention Assembly Strength


The chinstrap/retention assembly withstands a strength test of 400 pounds when tested in using ANSI Z90.1lb test methodology and equipment. Available in double D-ring or as a quick-disconnect (snap).


Customization


Each helmet can be designed and/or configured with a variety of different features: earphones, wire or flex boom microphones, communications cords/plugs, communication earplugs, and ANR (Active Noise Reduction).


Other upgrade accessories such as NVG , ANR Headsets and Lipe Lites are available upon request.


Additionally we supply standard US Military ANVIS-6 or ANVIS-9 helmet bags for these helmets in sage green,camo or custom colors .

General Aviation configuration and custom painting also available from Aeromiltec at extra charge .
ANVIS 6 or ANVIS 9 compatible dual visor housing supplied for SPH-4B, SPH-5 and HGU-56/P Helmets.
Respirator Helicopter